Kolekcja: Resin Diamond Smoothing Pads
Resin Diamond Smoothing Pads – Pre-Polish for Stone & Glass
Resin-bonded diamond smoothing pads for the critical pre-polishing stages between coarse diamond sanding and final cerium oxide finishing. The flexible resin matrix conforms to curved and flat surfaces, delivering consistent scratch removal and surface refinement on gemstones, glass, and ceramic — essential for achieving a true mirror finish.
🔥 Shop Resin Diamond Smoothing Pads
Available Sizes & Pricing
| Diameter | Grit Options | Backing Type | Price (USD) |
|---|---|---|---|
| 6" | 200 / 400 / 800 / 1,500 / 3,000 | Magnetic / Velcro / PSA | $15–$22 |
| 8" | 200 / 400 / 800 / 1,500 / 3,000 | Magnetic / Velcro / PSA | $20–$30 |
| 10" | 200 / 400 / 800 / 1,500 / 3,000 | Magnetic / Velcro / PSA | $26–$38 |
| 12" | 200 / 400 / 800 / 1,500 / 3,000 | Magnetic / Velcro / PSA | $32–$46 |
Grit Selection Guide
| Grit | Stage | Best For | Surface Result |
|---|---|---|---|
| 200 | Coarse smoothing | After 60–120 grit diamond sanding | Removes deep scratches |
| 400 | Medium smoothing | After 200 grit resin pad | Refines surface texture |
| 800 | Fine smoothing | After 400 grit resin pad | Near-scratch-free surface |
| 1,500 | Pre-polish | After 800 grit resin pad | Hazy gloss, ready for polish |
| 3,000 | Final pre-polish | Before cerium oxide finish | High gloss, minimal haze |
Compatible Applications
- Flat lap machine pre-polishing (Genie, Titan, Hi-Tech Diamond)
- Lapidary gemstone cabochon smoothing and pre-polish
- Glass surface scratch removal and refinement
- Ceramic tile and porcelain surface preparation
- Quartz, agate, jasper, and obsidian intermediate polishing
- Petrified wood and fossil stone surface refinement
- Curved and contoured stone surface smoothing
Related Tools
- Diamond Smoothing Pads
- Cerium Oxide Resin Pads
- Diamond Sanding Discs & Pads
- Triangular Diamond Polishing Pads
- Diamond Hand Pads
- Sanding Accessories
Frequently Asked Questions
-
Q: What is the difference between resin diamond pads and metal-bonded diamond pads?
A: Resin-bonded pads are softer and more flexible, making them ideal for smoothing and pre-polishing stages. They cut more gently than metal-bonded pads and produce a finer surface finish — essential before applying cerium oxide for a true mirror result. -
Q: What grit sequence should I use for lapidary cabochon work?
A: A typical sequence is: 60–120 grit diamond sanding → 200 → 400 → 800 → 1,500 → 3,000 resin pads → cerium oxide final polish. Skip grits only if the previous stage left no visible scratches. -
Q: Are resin diamond smoothing pads compatible with magnetic flat lap machines?
A: Yes — available with magnetic, Velcro, or PSA backing to fit Genie, Titan, Hi-Tech Diamond, and most other flat lap machines. Verify the diameter matches your machine’s lap plate before ordering. -
Q: Should resin diamond pads be used wet or dry?
A: Always use wet. Water lubricates the surface, flushes away swarf, prevents heat buildup, and significantly extends pad life. Never run resin diamond pads dry. -
Q: How long do resin diamond smoothing pads last?
A: With proper wet use and care, resin pads typically last 20–50 hours of active polishing depending on material hardness and pressure applied. Harder stones like quartz will wear pads faster than softer materials.